Mounting Your TimeMoto Clock (TM-600 series & TM-800 series)

This guide applies to the following models: TM-616, TM-626, TM-818SC, TM-828SC, TM-838SC.

To make your time clock ready for everyday use, follow these steps, mount it to the wall and plug it in.

1. Please attach the mount to the wall, as shown below:

2. If you want to connect your time clock by network/LAN cable, attach the network cable together with the power plug.

3. Mount the time clock, as shown below:

4. Place the screws into the mount and the time clock.

5. Put the power plug into a power outlet. The TimeMoto clock will now power on. If the Quick Installation has not been followed yet, the temporary WiFi hotspot will turn on, which will be used during the setup of the clock.

6. (If the Quick Installation has not been completed yet:) On the welcome screen, you see "SSID: TimeMoto-" followed by six digits. These six digits equal the last six digits of the TimeMoto clock's serial number. You can now continue with the Quick Installation.

Any questions?

Take a look at our Glossary or reach out to us via the Contact Form.