Mounting Your TimeMoto Clock

  • Last updated on June 5, 2023 at 1:33 PM

To make your time clock ready for everyday use, follow these steps, mount it to the wall and plug it in.

1. Please attach the mount to the wall, as shown below:

Attaching the mount to the wall

2. If you want to connect your time clock by network/LAN cable, attach the network cable together with the power plug.

Connecting the plug and network cable (optional) to the time clock

3. Mount the time clock, as shown below:

Mounting the TimeMoto clock

4. Place the screws into the mount and the time clock.

Placing the screws

5. Put the power plug into a power outlet. The TimeMoto clock will now power on. If the Quick Installation has not been followed yet, the temporary WiFi hotspot will turn on, which will be used during the setup of the clock.

Plugging in the time clock

6. (If the Quick Installation has not been completed yet:) On the welcome screen, you see "SSID: TimeMoto-" followed by six digits. These six digits equal the last six digits of the TimeMoto clock's serial number. You can now continue with the Quick Installation.

The welcome screen of the time clock


Any questions?
Looking for answers but not sure where to start? Check out our Glossary! It's a great resource to help you find the information you need. If you need further assistance, please contact us via the Contact Form.

Was this article helpful?